MPO HDMI 2.0 Fiber Optic Cables Terminations Set
MPO HDMI 2.0 Fiber Optic Cables Terminations Set
Share
Product Description
General Description
Phoossno MPO HDMI 2.0 Fiber Optic Cables Terminations Set is a ideal installation solution for used on home, residential, commercial integration, as well as EMC medical-grade projects. It can be replaced at any time without the need to replace the entire cable. There is no loss of signal over long distance and no EMI interference which make it as the best choice for point-to-point and distributed ultra high definition video connections.
KEY FEATURES
◆ Source HDMI 2.0 / Display HDMI 2.0 Termination set
◆ 20cm Long-each side
◆ HDMI2.0 standard(Not Support eARC)
◆ Support 18G Bandwidth with4K/50P/60P
◆ Support HDCP
◆ Self-detecting function for EDID information
◆ HDR formats is supported
◆ Up to 100m(330feet) Maximum Length.
◆ Plug and Play
MPO Connectors
◆ 12 fiber MALE PC type standard MPO (with pins)
◆ Use 6 Fibers 1 to 6 TYPE-A Straight on the main cable (not inverted)
◆ Compatible with MULTIMODE Fiber Optics OM3 OM4 OM5 (cannot work on single mode fiber)
Absolute Maximum Rating
Parameter | Symbol | Min | Max | Unit |
Power Supply Voltage | VCC | 4.5 | 5.5 | V |
Operating Temperature | Top | 0 | 50 | °C |
Storage Temperature | Ts | -40 | 70 | °C |
Relative Humidity | Hs | 10 | 80 | %RH |
Recommended Operating Conditions
Parameter | Symbol | Min | Typical | Max | Unit |
Power Supply Voltage | VCC | 4.75 | 5.0 | 5.25 | V |
Operating Temperature | Top | 0 | 50 | °C |
Specifications
Item | Description | |
Units | Transmitter (Source) | Receiver (Sink) |
HDCP & DDC | HDCP 2.2 Fully Support bi-directional EDID and HDCP communication | |
Video Bandwidth | 6 Gbps/x3Channel | |
Resolution | 480p, 720p, 1080i and 1080p deep color, 4Kp50/60 | |
O/E Converter | 6 channel 850 nm VCSEL array | 6 CH GaAs PD array |
Connector Type | HDMI type A and MPO | |
Cable Type | OD:3.0mm, Multimode 50/125 OM3-150 | |
Cable Outer Diameter | 3.0mm | |
Jacket Outer Material | PVC | |
Cable Color | Blue | |
MPO Insertion loss | ≤0.35dB | |
MPO Return loss | ≥30dB | |
Differential Input | 100 ohm | |
Power Consumption | 0.3W(Source) 0.4W(Display) |
Assembly Diagram