Define the expected handling, abrasion, shock and vibration. Review retention, strain relief and support for the exact assembly. Support cable weight independently of connectors and check locking-point geometry. Armor and screw locking alone do not establish vibration, crush or ingress qualification.

Compare cable diameter, connector dimensions, minimum bend radius and rear clearance. Allow for active connector housings and accessible service loops. Avoid pressure from cabinet doors and provide a replacement route. Measure the actual installed path rather than the straight-line distance.

The optical section avoids electromagnetic pickup, but active electronics, power arrangements and any copper conductors remain relevant. Do not assume a hybrid AOC provides galvanic isolation or complete system immunity. Review construction, grounding and routing with the integrator, and obtain the EMC evidence required for the installation.

Specify operating and storage temperatures, humidity, dust or water exposure, shock, vibration and cable movement. Include project test requirements and acceptance criteria. Evidence must cover the exact cable, connectors and installed assembly; protective transport caps do not establish protection for a connected interface.

No. This page does not establish military qualification or airborne approval. Review evidence for the exact model against the project's installation and acceptance requirements. Ground-based application illustrations are not proof of certification.

Test the intended video format and cable length with the actual endpoints, including power-up and reconnect behavior. Check retention, direction markings, bend limits and auxiliary power where required. Complete the project's specified environmental and EMC acceptance process.