Robot Arm

Route the vision camera’s data cable along the arm with suitable strain relief and clearance at each joint.

For moving routes, confirm the cable’s flex and torsion ratings for the actual motion.

Industrial Camera

Connect a compatible USB camera to the processing PC. Match the device port, connector clearance and screw-lock spacing.

Support the cable near the camera so its weight does not load the socket.

Automated Inspection

Plan the image-data connection between the inspection station and its processing PC, including enclosure entry and service access.

Check routed length, required image throughput and camera power before choosing a cable.

Integration Cabinet

Bring camera data into the industrial PC through an organized cabinet cable route, with accessible connectors and strain relief.

Allow service space and keep data wiring separated from power wiring as required by the installation.

Interfaces and protocol

Identify both device models and ports. A USB-C connector alone does not confirm a particular USB data mode, display function or power profile.

Image payload

Record resolution, transmitted bits per pixel and frame rate. Width × height × bits per pixel × frames per second estimates uncompressed payload before protocol overhead.

Installed distance

Measure the routed distance, including service loops and access to the equipment. Check connector clearance, bend radius and pulling limits.

Power

Confirm startup and continuous demand. Ask what power is available at the remote end for the exact model and length.

Installation environment

Check temperature, nearby drives, cable separation, oil or cleaning-fluid exposure, and the required jacket or flame rating.

Fixed or moving route

Specify whether the cable stays in a tray or moves with machinery. For moving routes, provide torsion, bend radius, speed and cycle requirements.

The PC needs to sit farther from the camera

An AOC is a candidate for a longer USB route. Verify the selected model and length with the camera at production settings.

Drives and motors share the work area

Optical transmission reduces susceptibility along the optical signal path. Connector electronics and copper conductors still require appropriate routing and power design; a hybrid AOC is not galvanic isolation.

The camera socket is difficult to access

Match plug dimensions and cable exit direction to the enclosure. A compatible screw-lock connection provides retention, but strain relief must support the cable independently.

Frames are incomplete or the camera reconnects

Check power, controller sharing, trigger timing, software buffers and cable installation. Test all cameras together and log frame errors, timeouts and restart recovery.